BRITA Armaturen
Tailored to fit your needs:
Our Pressurised
Solutions

The next generation of water filtration:
BRITA Pressurised Systems

BRITA Pressurised Systems are the most convenient solution for everybody who wants to enjoy BRITA filtered water. The idea is simple, yet brilliant: the filtration process takes place under the sink, and your BRITA-filtered water comes straight from the kitchen tap. Space-saving and easy to install, our Pressurised Systems provide you with BRITA filtered water for up to 6 months* – with only one filter cartridge.

BRITA Customer Service

For questions about products, water filtration and spare parts:

AU 1300 557 762
NZ 0800 4 BRITA / 0800 427 482

(Mo-Fri 09.00-17.00, charged at local rate from a landline phone, cost may vary from a mobile phone)

Tailored to fit your needs:
Our Pressurised Systems solutions

Only the best for you and your family:
how you benefit from using BRITA.

  • More convenience

    More convenience

    no need for carrying water bottles
  • Better taste

    Better taste

    significantly better tasting tap water
  • Healthy cooking

    Healthy cooking

    for more aromatic food preparation
  • Less waste

    Less waste

    good for you, good for the environment

How do BRITA Pressurised Systems work?

  • Replaces your kitchen tap
  • Transform tap water into freshly filtered BRITA water
  • Excellent for cold and hot drinks and for cooking
  • Multi-stage water filtration
  • Consistent reduction of taste and odour impairing substances (chlorine, lead, copper)
  • Cartridge capacity (up to 6 months)
  • More convenience: BRITA filtered water at the turn of a lever


How do you find the right BRITA Pressurised System for you?

  • Systems are tailored to your needs, from smart and simple to premium
  • Different designs, filtration performance, cartridge capacity, durability and pricing
  • To find the right system, compare product range and choose your favourite

Questions? You'll find answers right here:
BRITA Info Section.

BRITA Customer Service

For questions about products, water filtration and spare parts:

AUS 1300 557 762
NZ 0800 4BRITA / 0800 427 482
Mon - Fri 09.00 - 17.00
Calls are charged at a basic rate. Please refer to your service provider for charges.

BRITA Pressurised products are directly connected to your main water line, either connected to or replacing your kitchen tap. This means: optimized BRITA filtered water whenever you want, instantly and in any volumes you need.
The A 1000 filter cartridge is based on activated carbon block technology that filters chlorine as well as other taste and odour impairing impurities. It keeps fine solid particles like sand and rust up to a size of 0,5 micron back from tap water. The A 1000 filter cartridge fits all BRITA Taps and the On Line Active Systems.
A BRITA Tap replaces your existing kitchen tap and allows you to get cleaner, clearer great-tasting BRITA filtered water at the turn of a lever. All BRITA Taps are equipped with separate levers for regular hot and cold tap water and BRITA filtered water. Therefore you only use BRITA filtered water if you want to. A BRITA Tap is the most convenient and place saving solution for everybody who wants to enjoy BRITA filtered water.
The Cartridge Status Indicator integrated in the lever of the BRITA Tap shows your individual cartridge status based on local water hardness and individual water consumption. Each time filtered water is dispensed, it will light up either green, yellow or red.

Green light: Filter cartridge is working at optimum performance
Yellow light: Filter Cartridge capacity at 10%, get replacement soon
Red light: Filter cartridge needs to be replaced

Watch LED Cartridge Status Indicator Video
The cartridge lasts up to six months. The exact time depends on your water consumption.
BRITA Taps are designed for easy installation. Necessary instructions are supplied with the product. There is a video tutorial showing you how to install a BRITA Tap on our You Tube channel.
Yes. It's very easy and can be done within minutes in just four steps:
1. Unlock cartridge using two blue levers on side of cartridge head. No need to turn off your mains water, because there is an automatic shut of valve within the cartridge head,
2. Release pressure using the flush valve. After pressure release, don‘t forget to close valve again.
3. Pull old cartridge out and replace with a new one.
4. Lock the cartridge in place. You are good to go!

Watch cartridge exchange Video
BRITA filter technology reduces chlorine and other impurities. Once the cartridge is exhausted, this performance is dramatically reduced. To guarantee cleaner, clearer, great-tasting BRITA filtered water it is important to change the cartridge regularly.
That depends on the system you use. Please contact our service team for clarification.
If you have any questions or need further help or advice, please call our customer care team: 1300 557 762 (Monday – Friday 9am-5pm) On any other time, please e-mail enquiries solutions@brita.com.au We will get back to you as soon as possible.
BRITA Pressurised products are directly connected to your main water line, either connected to or replacing your kitchen tap. This means: optimized BRITA filtered water whenever you want, instantly and in any volumes you need.
The On Line Active filtration system can be mounted to any standard kitchen tap. It is hidden invisible under your sink and filters all cold water on your tap.
The cartridge lasts up to six months. It filters taste and odour impairing impurities, lead and copper and small particles.
BRITA On Line Active is designed for easy installation. Needed instructions are supplied with the product. Click here for a video tutorial showing you how to install a BRITA Tap.
Yes. It's very easy and can be done within minutes in just four steps:

1. Unlock cartridge using two blue levers on side of cartridge head. No need to turn off your mains water, because there is an automatic shut of valve within the cartridge head,
2. Release pressure using the flush valve. After pressure release, don‘t forget to close valve again.
3. Pull old cartridge out and replace with a new one.
4. Lock the cartridge in place. You are good to go!

Watch cartridge exchange Video
BRITA filter technology reduces chlorine and taste and odour imparing impurities. Once the cartridge is exhausted, this performance is dramatically reduced. To guarantee cleaner, clearer, great-tasting BRITA filtered water it is important to change the cartridge regularly.
On Line Active Direct can be installed at any tap. The filter cartridge itself is small and does not require much space.
That depends on the system you use. Please contact our service team for clarification.
For questions about products, water filtration and spare parts:
AU 1300 557 762 NZ 0800 4 BRITA / 0800 427 482
(Mo-Fri 09.00-17.00, charged at local rate from a landline phone, cost may vary from a mobile phone)
The black particles are parts of one of BRITA’s filter media, the activated carbon. The granulated activated carbon is made of coconut shells. Like each natural product, coconut shells are subject to natural variances regarding product quality. This can lead to abrasion of parts of the carbon into your filtered water. To eradicate any carbon dust which may be present, preparation of your cartridge is crucial.

Please prepare as per your cartridge instructions or see “How to prepare your cartridge”.

Please be assured that the contents of cartridge are food grade and completely harmless to yourself and if accidentally consumed will be harmless to health. Their presence will not affect the performance of the cartridge.

If there are still dust or particles present after this initial preparation, then we would suggest that the cartridge is removed from the system an re-prepared by:
MAXTRA & Classic cartridges:
Vigorously shaking under water, then re-install and flush through with two litres of water.
A1000 cartridges:
Flush a further two litres of water through the cartridge.
BRITA Pressurised products are directly connected to your main water line, either connected to or replacing your kitchen tap. This means: optimized BRITA filtered water whenever you want, instantly and in any volumes you need.
The On Line Active filtration system can be mounted to any standard kitchen tap. It is hidden invisible under your sink and filters all cold water on your tap.
The cartridge lasts up to six months. It filters taste and odour impairing impurities, lead and copper and small particles.
Cartridge type Cost per litre*
Filter Disc € per litre
A1000 € per litre

*Cent per litre based on average selling price of single Filter Disc and A 1000 cartridges during Jan - Dec 2014.
BRITA On Line Active is designed for easy installation. Needed instructions are supplied with the product. Click here for a video tutorial showing you how to install a BRITA Tap
Yes. It's very easy and can be done within minutes in just four steps:

1. Unlock cartridge using two blue levers on side of cartridge head. No need to turn off your mains water, because there is an automatic shut of valve within the cartridge head,
2. Release pressure using the flush valve. After pressure release, don‘t forget to close valve again.
3. Pull old cartridge out and replace with a new one.
4. Lock the cartridge in place. You are good to go!

Watch cartridge exchange Video
BRITA filter technology reduces chlorine and taste and odour imparing impurities. Once the cartridge is exhausted, this performance is dramatically reduced. To guarantee cleaner, clearer, great-tasting BRITA filtered water it is important to change the cartridge regularly.
On Line Active can be installed at any tap. No need for additional plumbing or drilling holes. The filter cartridge itself is small and does not require much space.
That depends on the system you use. Please contact our service team for clarification.
We offer a two year manufacturer’s warranty on all BRITA systems.

BRITA On Line Active filtration system also come with a 30 day money back guarantee. If you are not completely satisfied with your system, please contact BRITA customer care within 30 days of your purchase date and you’ll get your money back.
If you have any questions or need further help or advice, please call our customer care team: 0844 742 4800 (Monday – Friday 9am-5pm) On any other time, please e-mail enquiries@brita.co.uk We will get back to you as soon as possible.
The black particles are parts of one of BRITA’s filter media, the activated carbon. The granulated activated carbon is made of coconut shells. Like each natural product, coconut shells are subject to natural variances regarding product quality. This can lead to abrasion of parts of the carbon into your filtered water. To eradicate any carbon dust which may be present, preparation of your cartridge is crucial.

Please prepare as per your cartridge instructions or see “How to prepare your cartridge”.

Please be assured that the contents of cartridge are food grade and completely harmless to yourself and if accidentally consumed will be harmless to health. Their presence will not affect the performance of the cartridge.

If there are still dust or particles present after this initial preparation, then we would suggest that the cartridge is removed from the system an re-prepared by:
MAXTRA, Classic & Multifit cartridges:
Vigorously shaking under water, then re-install and flush through with two litres of water.
Inline, A1000 cartridges:
Flush a further two litres of water through the cartridge.